The Milano electric shower features: Unique swivel elbow pipe connection, allowing plumbing to enter shower from left or right hand side. This makes them ideal for retrofit installations, as often no extra plumbing is required. Indicator lights to show low incoming water pressure and when the selected temperature is too high to allow sufficient water flow through the heating elements Phased shut-down safety feature - the shower will continue to run on for a few seconds after being switched off. This flushes out excess hot water from the shower and reduces limescale build-up inside the unit. Separate temperature control to ensure that your next visit to the shower needs no further adjustment. Temperature stabilisation to minimise temperature fluctuation when other taps are opened. Luxury three spray handset with Rub-clean feature. New-style riser rail that fits flush to wall, with integrated hose retainer and soap tray. TheMilano Electric showers are ideal for a second bathroom and for homes that do not have a stored hot water supply. Electric showers must be installed to a mains cold water supply with a minimum running pressure of 1.0 bar. A separate and permanently connected cable must be taken from the consumer unit directly to the shower via a double pole isolating switch. The installation must comply with the latest IEE wiring regulations. If you are in any doubt please contact a qualified plumber and/or electrician.